Guangdong ENNO Medical Technology Co.,Ltd
EN-T201 Rechargeable Hearing Aid Operation Manual
(Apply for T201A & T201D)
Thank you for purchasing our products.
As a reliable seller, we always devote ourselves to providing customers with 100% satisfactory products and services, we hope you can get the same feeling from this shopping experience.
Have a nice day.
Press the volume button as following, and turn the volume to a minimum before using. Choose the most suitable one from three different sizes of ear plugg provided, and then put the ear plugg on the horn. Standard as inserting into the inner ring of the ear plug.
According to your own needs, press the Power/Mode to adjust to the appropriate mode, each press switches a mode.
After pressing the Power/Mode, button for 3 seconds, the green light, flashes 3 times and goes out, indicating that it has been started.
" to turn the volume to the lowest level before use.
" to adjust the volume to the appropriate position. Turn up and turn down of the volume is shown. 1-6 gears in total.
" button, the hearing aid issued a "beep" sound for each press, and the volume increases one gear; When the hearing aid volume reaches to the maximum range, the hearing aid will beep two times, indicating that the volume has reached to the maximum volume;
" button, the hearing aid issued a"beep" sound for each press, and the volume decreases one gear; When the hearing aid volume reaches to the minimum, the hearing aid will beep two times, indicating that the volume has been turned down to the minimum volume.
6. Operation of volume mode switching shown as follows:
Each press switch a mode at short press mode and beep once to prompt, there are three audio modes.
c. Short press once and the hearing aid beeps three times, prompt to enter the third mode (Answering mode. This mode reduces the volume to the minimum and makes it easier to answer calls, so the gain of the third mode is limited to about 10dB); The above three modes of operation are recyclable.
7. Remove the hearing aid from the back of the ear after using, press the mode button for 3 seconds, and the blue light flashes 3 times and goes out, indicating that it has been turned off.
First: Choose the most suitable size that fits your ear canal and place it on the horn.
Second: Select or snip the length of the sound tube according to your own requirements and connect it to the other end of the adapter.
Shock proof degree symbol: 
2. Attach the ear dome to the sound tube.
4. Cleaning and disinfection of earplugs: Please clean them with pure warm water.
2. The above two steps are silent, please charge for 12 hours before starting up, repeat 1, 2 steps;
3. If the above 2 steps do not work, the hearing aid may work abnormally, please contact with the local dealer or send back to the company for repair.
Copyright © 2022 Guangdong ENNO Medical Technology Co., Ltd., All Rights Reserved.
